CANON PRINTER MX922 PRINTHEAD ERRORS

 

HOW TO TROUBLESHOOT CANON PRINTER MX922 PRINTHEAD ERRORS

How to Troubleshoot Canon Printer MX922 Printhead Errors? 

Canon MX922 print head error is a mechanical failure that you may face in daily use. This error won’t let you print a page and happen again and again if you don’t find a solution to solve it. In this manual, you will find effective solutions that are easy to understand and easy to follow.

Possible Causes of Canon MX922 Print Head Error

It may be possible that the printhead installed is not compatible or well compatible with your MX922 printer. In such scenarios, your printer will fail to communicate with the printhead while printing a page.

Printhead nozzles are choked.

This error can also occur if the cartridge you are using does not support your MX922 printer model.

When setting up the printer or inserting the ink cartridge, the position of the printhead changed accidentally.

If the cartridge you are using to print pages is empty or suddenly stops working.

An error may appear if a piece of paper gets stuck in the printhead area.

Sometimes, Canon MX922 print head error occurs due to outdated drivers.

Effective Methods to Resolve Canon MX922 Print Head Error

To quickly fix the Canon MX922 print head error, take a look at the troubleshooting methods mentioned below.

Method 1: Reset Canon MX922 Printer

  • The primary step is to turn off your printer. Now, press the ON button, and simultaneously press the STOP button.
  • Afterwards, you have to release the stop button for one time and then press it again five times.
  • Now, release the ON button and your printer LCD screen will light up.
  • After a few seconds, you have to press the Power button in order to switch off your printer. This will reset your printer.
  • Now, try to print one page. If the Canon MX922 print head error still persists, try the next method.

Method 2: Perform the Printhead Cleaning Process

standard cleaning

  • Turn on your MX922 printer and load one or more pages into the printer tray.
  • Press the Menu button on the front panel of the printer. The printer display will flash.
  • Select the “Setup” option and then press OK. From the setup screen, you need to locate and select the “Maintenance” option.
  • A list with various options will appear. Select the “Deep Cleaning” option and press OK.
  • A pop-up box will be displayed for your confirmation to clean the printhead, select “Yes”.
  • This will begin cleaning your MX922 printhead. Once you see the “Pattern Print Confirmation” screen, select Yes and following it, press OK.
  • The print head nozzle check pattern will print on one page. When the completion message appears on your printer screen, press OK.
    • Now, check the nozzle check pattern and print quality. If the problem is not fixed yet, proceed to the next method to resolve Canon MX922 print head error.

Remove the printhead and clean it manually

  • First open the top cover of your MX922 printer. Thereafter, open the scanner unit and the vehicle will automatically adjust to its position.
  • Now, you have to take out the power from the back of the printer. Doing so will shut down your printer immediately. Proceeding, remove all the cartridges that have been installed on your printer.
  • Next, carefully remove the printhead from the printer to begin the cleaning process.
  • Now, dip a cotton cloth in lukewarm water and gently clean all the ink patches on the printhead.
  • Also, if a cartridge is empty, replace it with a new one.
  • When you see that the printhead has been thoroughly cleaned, allow it to dry for some time. Then, reinstall the printhead in its intended position.
  • Insert all cartridges, turn off the scanner unit and finally close the top cover of the printer.
  • Now, connect the power cord to the printer, turn it on, and try to print a page. This can resolve Canon MX922 print head error. If not, then go ahead and follow the next method.

Method 3: Install the Latest Driver That Supports Your MX922 Printer

A printer driver is software that sends print requests to your printer. Therefore, if the software gets corrupted, you may see Canon MX922 print head error on your printer LCD screen. To fix the problem, uninstall the driver from your Mac or Windows operating system and then reinstall it.

  • Run a compatible web browser and proceed to canon.com/ijsetup
  • Input the MX922 in the search bar, press Go, and select the “Drivers and Downloads” tab.
  • Select the appropriate one for your operating system and language. Tap on “Select” and following that, click on “Download”.
  • Link your MX922 printer to the computer and accept the installation agreement by clicking Yes.
  • This will initiate the printer driver installation. Once this is done, try to print a page using the newly installed printer driver.

Comments

Popular posts from this blog

Canon Pixma MG2520 Setup

Ij.start.canon : Setup Your IJ Start Canon Printer

CANON B200 ERROR