CANON B200 ERROR

CANON B200 ERROR: WHAT IT IS AND HOW TO FIX IT?

Why does the Canon B200 error occur?

Canon B200 error is one of the critical issues that most Canon printer users face. This error is usually caused by a faulty and unclear printhead. The printhead is a Canon printer component that actually transfers color or black ink to a page. The error can also appear if the ink cartridge is not inserted into the printer properly, a piece of paper is stuck in the printhead or because of a damaged cartridge. It is necessary to fix this problem immediately, otherwise you will not be allowed to print a single page from your printer. So for a smooth printing experience, take a look at all the easy and latest troubleshooting steps.

Quickly Reset Your Printer

The printhead may not be positioned properly at the required location. This Canon problem is sometimes easily solved by resetting your printer. Disconnect all cables and wait for a period of 30 minutes. Now, attach the power cable back to the printer port and wall outlet. When you turn on the printer, everything will be reset to its proper position.

The printhead may not be positioned properly at the required location. This Canon problem is sometimes easily solved by resetting your printer. Disconnect all cables and wait for a period of 30 minutes. Now, attach the power cable back to the printer port and wall outlet. When you turn on the printer, everything will be reset to its proper position.

Remove any pieces of paper or obstacles

Your printer may not be able to connect to the printhead due to an obstacle. Now, turn off your printer and open the top cover of the printer. After opening the top cover, take out all the cartridges and then lift the printhead latch. Now, gently remove the printhead. Check the internal areas that surround the printhead properly. If any paper or obstruction is found, remove it immediately to correct the Canon B200 error.

Gently clean the printhead and wipe off any excess ink

Also, if you have not cleaned the printhead for a long time, then clean it immediately. Lift the printhead off the printer to begin the cleaning process. Now dip a clean and lint-free cloth in warm water. Remove any old ink on the printhead using a cloth. Next, take a disposable container, place a paper towel in it and pour hot water until the paper towel is completely submerged. Now put the printhead in the container, so that the nozzles are clean. Remove the printhead from the container and then place it on a clean paper towel. Let the printhead soak for about 10 minutes. Next, reinstall the printhead and try to print.

Replace the old ink cartridge with a new one

If the cartridge you are using is no longer working, the Canon B200 error will also be displayed on your screen. Therefore, it is imperative to remove the damaged cartridge for clear and error free printing. So, get a new cartridge that is suitable for your Canon printer model. You can refer to the manual that comes with your printer to check cartridge compatibility. Then, properly insert the ink cartridge into the printer.

Reinstall the printer driver

If the troubleshooting steps above do not resolve the Canon B200 error, then it could be a problem with the installed printer driver. So, go to the official website of Canon and reinstall the software.

Must Read: HOW TO REPLACE A CANON TS3122 INK CARTRIDGE?

Comments

Popular posts from this blog

Canon Pixma MG2520 Setup

Ij.start.canon : Setup Your IJ Start Canon Printer